Waterproof 75V 100A ESC 2KW Motor And Remote Control Kit For Efoil | Esurfboard | Hydrofoil



Manatee100  75V 100A VESC

Voltage: 75V maximum (recommended within 16S)

Current: 100A continuous, maximum 200A

Features:

 1、Based on the design of vesc75300 hardware principle.

 2、Using 6 mosfet  IRF7769L (100v 200A each).

 3、Independent gate drive.

 4、Independent power supply.

 5、Independent current sampling.

 6、Active filter circuit makes current sampling more accurate.

 7、Rich onboard interface.

 8、Independent two-way adc.

 9、Support VESC TOOL official 75300 firmware.

 10、The circuit is reasonable and stable.


2KW Jet Propeller Paddle 65111 Electric Surfboard Motor

Specification: 

Model type: 65111

Motor dimension: 65*111mm

Shaft:10mm 

Motor stator slot: 12

Motor pole: 12

Motor KV:150

Motor Wire: 12AWG wire

Maximum voltage: 14S

Maximum current 140A 

No-load current: 1.7A 142KV

Maximum power: 2kw and 1.5kw continuous 

Resistance:115.8/114.9/114.7mΩ

Waterproof level:IP68

Weight:1.41kg

VX3 Waterproof Remote

Feature:

1.6-inch super clear and big screen display

Display shows more: Except for basic telemetry data, it also display GPS, motor power, real-time temperature of MOS tube, and throttle progress bar information

Be compatible with  VESC and Non-VESC

ESK8 mode / E-surf mode switching freely

Esurf mode:Cruise speed control function

Waterproof IP rating: IP67

Bigger remote battery capacity:1500MA

ESC failure report :Detect possible failures of the ESC in time for replacing

Controller mode: PPM/UART

Charging way:Wireless Magnetic Charging

VX3 Remote comes with Receiver

Remarks: For remote VX3, it is recommended to wash it with fresh water or soak it in fresh water for at least one minute after using to reduce salt residue and extend the service life of the remote.

Net Weight: 600G

Gross Weight: 900G

Size:22*13*7mm


Related Items