Swordfish S40 Water Jet System 1500W 8.5KGF VX3 Electric Fin Kits For SUP|Surfboards|Paddle boards|Kayaks

VX3 Remote Control

Feature: 1.6-inch super clear and big screen display;

Display shows more: Except for basic telemetry data, it also display GPS, motor power, real-time temperature of MOS tube, and throttle progress bar information

Be compatible with VESC and Non-VESC

Waterproof IP rating: IP67

Bigger remote battery capacity:1500MA

ESC failure report ：Detect possible failures of the ESC in time for replacing

Controller mode: PPM/UART

Charging way:Wireless Magnetic Charging

VX3 Remote comes with Receiver

Remarks: For remote VX3, it is recommended to wash it with fresh water or soak it in fresh water for at least one minute after using to reduce salt residue and extend the service life of the remote.

S40 water jet system-Tail fin version

packing list:

①Swordfish S40 water jet system*1;

②50A waterproof power socket*1;

③Tail fin interface*1, latch*1, accessory*1, additional accessory*1;

④M4*20 screws*6 (including extra*3)

⑤M2.5 wrench*1; M4 wrench*1;

⑥Extra water cooling connector*1;

⑦Cable protective sleeve*1 (pre-installed);

S40 water jet system-DIY version

Packing list:

①Swordfish S40 water jet system*1;

②50A waterproof power socket*1;

③DIY interface*1;

④M4*20 screws*6 (including extra*3)

⑤M2.5 wrench*1; M4 wrench*1;

⑥Extra water cooling connector*1;

⑦Cable protective sleeve*1 (pre-installed);