Ride the Wave. Own the Water.

The Firduo Electric Jet Bodyboard Sea Scooter is built for those who don't just watch the ocean — they conquer it. Whether you're surfing, diving, or exploring underwater, this board delivers raw power, intuitive control, and all-day adventure.

🌊 Introducing the Firduo Electric Bodyboard V3

Third generation. Rebuilt from the inside out.

The V3 brings an upgraded power system for stronger, more consistent thrust — paired with a refined control system that responds instantly to every input. A redesigned exterior cuts through water with less drag, while enhanced waterproofing keeps every session worry-free, no matter the conditions.

This isn't just an update. It's a new standard.

⚡ Performance That Speaks for Itself

• 340N Thrust — powerful enough to pull you through waves and currents with ease
• 48V / 20Ah Battery — up to 2 hours of continuous cruising on a single charge
• Fast Charge in 3.5 Hours — spend more time on the water, less time waiting
• 17.6kg Total Weight — powerful yet portable enough to transport and launch solo

🎮 Smart Controls, Built for the Water

• 2.8" TFT Display — real-time speed, battery level, and ride data at a glance
• GoPro-Compatible Mount — capture every session without extra accessories
• Quick-Lock Self-Latching Connectors — tool-free battery swap in seconds
• Recommended Age: 16+ — suitable for teens and adults

🛡️ Built to Last in Any Condition

• Fully Waterproof — engineered for open ocean, lakes, and surf breaks
• CE / RoHS / FCC Certified — meets international safety and quality standards
• Compact Dimensions: 100 × 50 × 34 cm — fits in most SUVs and boat storage

🛡️Certification and Transportation

• CE · RoHS · FCC · UN38.3 · MSDS · Shipping Report... | View Certifications

• Ships from: Guangdong, China| Shipping Info

🚀 Setup Guide — Get on the Water in 5 Steps

No tools required. From unboxing to first ride in under 10 minutes.

1. Step 1 — Unbox & Inspect
   Remove the board, battery pack, and charger. Check all connectors and the TFT screen for any shipping damage before proceeding.
2. Step 2 — Charge the Battery First
   Connect the 54.6V / 5A charger to the battery pack before first use. Full charge takes ~3.5 hours. The charger indicator turns green when complete. Do not skip this step on your first session.
3. Step 3 — Install the Battery
   Align the battery pack with the board's quick-lock connector slot. Push firmly until you hear a click — this confirms the self-latching connector is fully seated and waterproof. Give it a gentle tug to verify it's locked.
4. Step 4 — Power On & Check the Display
   Press and hold the power button for 2 seconds. The 2.8" TFT screen will show battery level, speed mode, and system status. Confirm battery is sufficiently charged before entering the water.
5. Step 5 — Enter the Water & Ride
   Lie prone on the board with your chest centered. Use the hand trigger to control thrust — start at low speed to get a feel for the board's response. Lean left or right to steer naturally.

⚠️ Safety Reminder: Always wear a life jacket. Recommended for ages 16+. Do not ride near swimmers or in restricted waterways.

❓ Frequently Asked Questions

Q1: Do I need prior experience to ride the Sea Scooter?
No experience required. The board is designed for beginners and experienced riders alike. Start in calm, shallow water at low speed — most riders feel confident within 15–20 minutes of their first session.

Q2: How long does the battery last, and can I extend ride time?
Up to 2 hours at constant cruising speed. Actual time varies by rider weight, water conditions, and throttle usage. Purchase an additional 20Ah battery pack ($788) to extend your session — swaps take seconds with the quick-lock connector.

Q3: Is it safe to use in saltwater? And what is the waterproof depth?
Yes. The board is fully waterproof(Core components: control system, power system, power supply system) with a rated depth of 5 m (16.4 ft), making it suitable for both surface riding and shallow diving. It is designed for both freshwater and saltwater use. After saltwater use, rinse the board and battery connector area with fresh water to prevent long-term corrosion on the contacts.

Q4: What happens if the battery runs out on the water?
The board is buoyant and will float without power — you will not sink. The TFT display shows real-time battery level so you can monitor charge and return to shore before depletion. A low-battery warning alert is built into the display system.

Q5: Can I ship this internationally? Are there battery restrictions?
Yes, we ship worldwide. The 48V 20Ah lithium battery is certified（UN38.3 · MSDS · Shipping Report...）. Some routes may require the battery to be shipped separately or via specific carriers. See our Shipping Info page for details on available routes and delivery times for your region.

📸 Special thanks for the photo:

#Electrek.co #Hermanos Ruiz González #Jared Watney #KayakDIY (Rank order is random)