Configurable RPM-, current-, voltage- and power limits
Input source: PPM, Analog, NRF Nyko Kama Nunchuck
Communication ports: USB, CAN, UART
Throttle curve and ramping for all input sources
Seamless 4-quadrant operation
Motor revolution, amp hour, watt hour counting
Real time data analysis and read out via communication ports
Adjustable protection against:
Low input voltage
High input voltage
High motor current
High input current
High regenerative braking current (separate limits for the motor
and the input)
High RPM (separate limits for each direction)
Digital VCC and analog VCC are produced by different voltage regulators
respectively to make the system AD conversion more accurate
Motor wire: 8AWG
Power cable: 6AWG
FD65162 100KV/120KV waterproof motor
VX3 Waterproof Remote Control
Feature:
1.6-inch super clear and big screen display
Display shows more: Except for basic telemetry data, it also display GPS, motor power, real-time temperature of MOS tube, and throttle progress bar information
Be compatible with VESC and Non-VESC
ESK8 mode / E-surf mode switching freely
Esurf mode：Cruise speed control function
Waterproof IP rating: IP67
Bigger remote battery capacity:1500MA
ESC failure report ：Detect possible failures of the ESC in time for replacing
Controller mode: PPM/UART
Charging way:Wireless Magnetic Charging
VX3 Remote comes with Receiver
Remarks: For remote VX3, it is recommended to wash it with fresh water or soak it in fresh water for at least one minute after using to reduce salt residue and extend the service life of the remote.
