FIRDUO Manatee 100 PRO Based on VESC with Waterproof Case For Electric Surfboard /Electric Skateboard / Electric Scooter

FEATURES

• Controlled by the STM32F4 microcontroller, frequency up to 168MHz.

• Sensored and sensorless FOC with auto-detection of all motor parameters.

• Brushless, brushed DC motors and IPM motors are supported.

• Robust starting torque performance in both sensorless and sensored modes.

• Support four control modes:Duty-cycle Control,Speed Control,Current Control

     and Position Control.

• Real-time data logging and monitoring.

• Adjustable protection against:

- Low input voltage limit. - High input voltage limit.

- High motor current limit. - High input current limit.

- High regenerative braking current limit (separate limits for motor and input).

- High ERPM limit (separate limits for each direction).

• Overtemperature protection.

• Supports motor temperature detection and is compatible with motor temperature sensors

    including: NTC 10K at 25℃, NTC 100K at 25℃, PTC 1K at 100℃, KTY83/122.

• The compact controller design fits in any confined space.

    Size: 109mm * 75mm * 38.6mm (4.29in *2.95in *1.52in)，Excluding installation hole length.

SPEC

• Fully waterproof, except for the wire end; Waterproof design for 5 meters Underwater.

• Voltage: Safe for 4S~20S(14-84 V).

• Current: 100A Continuous,150A Peak.

• ERPM: 150,000.

• Motor Control Modes: BLDC square wave and FOC sine wave.

• Supported Sensors: Sensorless,HALL, ABI, AS5047,AS5048A.

• Control Interface Ports: USB,CAN,UART.

• Input Set Support: PPM,ADC,UART.

• Battery Wire: 8AWG.

• Phase Wire: 8AWG.

• Regenerative Capacity: Yes.

• Programmable: Yes.

• Built-in Bluetooth.

Packing List

• Manatee100 Pro VESC *1

• USB Type-C *1

• PH2.0 2-Pin Adapter Cable -CAN*1

• Outer diameter 6mm * Length 18cm Water pipe * 2

• Wiring diagram*1

 • 120A waterproof connector(optional)

Net weight:  0.5KG

Gross weight:  0.7KG

Packaging size:  21CM * 15CM * 12CM